Stones products Materials are sold in different sizes and types. Including: export blocks (standard export blocks that are at least 1.5 width, 1.5 height and 2 meters long), consumable blocks (manufactured in small sizes used for street paving, street tables, etc.), slabs (sliced stones at least Width 1.5 meters, 2 meters length and 2 and 3 cm in diameter or more) , Cut to size Stones (30.5 x 30.5, 30.5 x 61 cm or any size with 1.5 or 2 cm Diameter or more) .
Travertine is a form of limestone deposited by hot springs. travertine commonly contains vibrant ranges of colors & special specifications including layered, transparent texture & constant color. two cutting types use to create travertine tiles are the Vein Cut and the cross Cut. Vein cut describes the cutting process by which a cut is made against the bedding planes, or along the vein. This exposes the edge of the formation and gives the travertine tile a linear pattern.
Marble is a metamorphic rock which is formed from limestone recrystallization under high temperature and pressure over millions of years. The main mineral constituents of most marbles, are Calcite, Quartz, Hematite, Graphite, and Limonite. marble has a wide range of colors due to the presence of impurities within it.
Those marbles which are among the calcareous rocks, interconnected by cementitious materials and forms a layered structure. If the grain sizes are between 70 microns to 4 mm, it is called sandstone, while the larger grains turn into conglomerate stone. Marbles which are among calcareous rocks, are always layered & usually consists of very beautiful crystal lodes and fossils which gives a special beauty to this type of stone.
Granite is an igneous rock which forms from cooling & hardening of magma below Earth's surface. Granite is composed mainly of quartz, feldspar, mica, and other minerals. depending on their mineralogy Granites can be predominantly white, pink, or grey in color. Granite is a very hard stone and resistant to damage. The average density of granite is 2.65 g/cm3.
Marmar stone with a brand name of Onyx is a metamorphic rock with calcium carbonate as its main mineral constituent. due to aluminum and magnesium minerals presence within, onyx stones are ranging to many colorful varieties such as pure white, black, green, pink & yellow. Onyx is not applicable for exterior spaces since it will lose its durability when exposed to sunlight & weathering.
Traonyx stone is a combination of marble and travertine stones with the same properties analysis. it has a variety of colors & patterns & can be supplied in vein & cross cut types, it should be noted that cross cuts have a higher resistance. Traonyx can be used on a diversity of applications in both interior & exterior spaces. it is also useful for lighting designs, in which, by passing light from the marble parts can create a beautiful appearance.
Crystal stone is a metamorphic limestone with grains large enough to be visible with unaided eye, it has a full crystalline texture and mainly composed of calcite and small amounts of Wollastonite. The water absorption is usually under 1%, the Specific gravity is 2.65 g/cm3 & Compressive strength is 115 Mpa. It has a low porosity & proper Abrasion resistance. Crystal stone is suitable for exterior facades & pavements and has a good adhesion with grout. In order to avoid slippery, bush-hammered & cubic finishes can be applied on it.